Wmic Get Serial Number

There is a million things that can go wrong with a Windows computer and it depends on where you get the problem that can help determine how it can be fixed. For instance, it can be very problematic when you get a freeze, blue screen or automatic restart while Windows is booting because usually the most information you will get is a rather cryptic BSOD (Blue Screen of Death) message which sometimes is pretty useless. You can however, pick up clues about a problem during boot by watching for when it occurs.

  1. Wmic Get Serial Number Command
  2. Wmic Get Serial Number Remote Computer
  3. Wmic Get Serial Number Bios

Cant view Windows Product Key with the WMIC command I wanted to check on my windows product key and I used the well known 02 methods: wmic path SoftwareLicensingService get OA3xOriginalProductKey. Wmic csproduct get vendor,name This is the command to retrieve the type and Vendor and modelnumber from the machines hardware. Wmic bios get serialnumber This is the command to get the serial number out of the machines BIOS. I put a picture of these commands right down this line. Some additional information. The following article will help you to find the computer serial number. Please use one the method bellow to retrieve the computer serial number: 1. Using the buid in 'wmic' command: 'wmic bios get serialnumber' Tip: You can use the command 'wmic csproduct get name' to retrieve the local computer model. Using a vbs script.

For instance, if you get a problem or crash at a point after you see the Windows login or welcome screen, programs starting with Windows would be the first place to look. A problem very early in the boot process, before Windows has really had a chance to start could be a problem with the Master Boot Record or the files Windows calls upon to start the boot process.

A different point in the boot process could be a driver issue, most drivers are loaded around the time you see the Windows logo animation and a crash here is possibly a corrupt, wrong or bad driver. If you can boot into Safe Mode but not into Windows, chances are a third party driver could be the culprit. If the video driver hasn’t been uninstalled then it’s not that difficult to find out what the video adapter is to download a new driver.

If you aren’t at the computer or the video driver has been removed then it could be more difficult to identify which video driver needs reinstalling. It’s also no fun trying to work in VGA mode with a low resolution while trying to find out. Of course, if the internet is available you can download a 3rd party utility such the portable information tool CPU-Z which can identify the CPU, mainboard, memory and graphics adapter, or use a bootable disc such as Hiren’s Boot CD which has a number of tools that could help.

Open Command Prompt by pressing the Windows key on your keyboard and tapping the letter X. Then select Command Prompt (Admin). Type the command: WMIC BIOS GET SERIALNUMBER, then press enter. If your serial number is coded into your bios it will appear here on the screen. Get Serial Numbers of Hard Drives wmic path win32physicalmedia get SerialNumber SerialNumber 9RXFA3FG Z2AP14Z2. This entry was posted in Windows and tagged WMIC.

There’s another method where you can manually detect what video card you have which doesn’t require the use of any other tools but those present in Windows.

Identify Your Video Adapter in Windows 32-bit

This is achieved by using the built-in Windows debug tool. There is a rather sizable disadvantage to this method, and that is it doesn’t work on 64-bit Windows versions. No 64-bit version of Windows has ever included this tool and if you try to run it, you will just get an error.

The dubug.exe does however work on all 32-bit versions of Windows and is even still included in Windows 8 32-bit. To find your graphics adapter:

Since then, the ergoCentric team has been continuously improving its seating systems and is dedicated to designing and manufacturing the best ergonomic seating in the world. Its build-to-order manufacturing system and always in stock inventory of components allows ergoCentric to fit virtually 100% of the workforce quickly and cost effectively. Ergocentric saffron chair Built using the same high quality materials used in all ergoCentric chair lines, the Saffron R series offers a cost effective and comfortable solution for ergonomic task seating. The Saffron R series is designed with all the features ergonomists demand: quality materials, quality workmanship and ergonomic function. Saffron R chairs also feature a 5' Back Height Adjustment System for ultimate. Built using the same high quality materials used in all ergoCentric chair lines, the Saffron series offers a cost effective and comfortable solution for ergonomic task seating. The Saffron series is designed with all the features ergonomists demand: quality materials, quality workmanship and ergonomic function. Saffron chairs also feature turn dial independent back height adjustment up to 4. Built using the same high quality materials used in all ergoCentric chair lines, the Saffron series offers a cost effective and comfortable solution for ergonomic task seating. The Saffron series is designed with all the features ergonomists demand: quality materials, quality workmanship and ergonomic function.

1. Open up the DOS command prompt by pressing the Win key+R, type cmd into the search box and press Enter.

2. Type debug in the command prompt and press Enter. This will start the debug prompt, indicated by a dash “-” at the beginning of each line.

3. Now type: d c000:0000 and press Enter. There are plenty of suggestions around the web for starting the search at a different address range such as c000:0040. This will most likely work just as well but starting at the beginning simply means you won’t miss any information by starting from an address too far down.

If you don’t spot anything that looks like a video adapter name, simply type d again at the prompt and press Enter to load in the next block of data. You might have to use the d command a few times but eventually the debugger should show what you can identify as the video adapter.

As you can see from the square boxes above, the video card has been identified as an Nvidia Geforce 7600GT, the arrows show the commands that were typed in. To get out of the debugger and back to an ordinary command prompt, simply type q and press enter.

This method is quite successful at getting the video adapter but is by no means foolproof. For instance several integrated graphics chipsets may only provide the motherboard vendor’s name and not the graphics chipset.

Find your Video Adapter Through WMI

Another way to get the graphics adapter which works on all versions of Windows including 64-bit is to gather the information through the Windows Management Instrumentation (WMI) component. To get the name of the adapter type the following into the Command Prompt:

wmic PATH Win32_videocontroller GET description

This will get the name of the adapter IF there is a driver installed for it. If not, it will simply show the standard VGA adapter. To get the hardware ID for the video, type in:

wmic PATH Win32_videocontroller GET pnpdeviceid

With the ID you can then search on websites such as Devid.info or The PCI ID Repository armed with this information and should be able to get the vendor and product name. The second backslash in the ID information and data after it is not needed to perform a search. There is also some other commands you can place after the GET argument such as “AdapterRAM” to get the size of the video memory in bytes, “Driverversion” will list any installed driver version, simply separate them with a comma for more than 1 argument at once. It’s worth reading the Microsoft Win32_VideoController supported arguments for a more comprehensive list.

So you don’t have to memorize any of the above commands, we have created a simple batch file for you to run. It will show you the name of the graphic adapter, the driver version, how much memory it has and its PNPdeviceId in a console window. Simply download and double click the .BAT file.

Download Get_Graphics_WMI batch file

These methods are obviously not going to be your primary way of gathering information about a graphics adapter, but is still useful to know if other options for you aren’t working.

You might also like:

6 Free Programs to Check Your Video Card Memory For ErrorsIdentify What is Loaded with rundll32.exe in the Windows Task List7 Programs to Check Installed Audio and Video Codecs On Your ComputerUsing Webcam or Video Capture Source Simultaneously on Several Application7 Ways to Easily Identify SVCHOST.EXE Service Name

AF5 years ago

WOW, Thanks for your tip

Reply

very very helpful man

Reply
zgembo10 years ago

very helpful, thanks

Reply

Worked beautifully thanx!

Reply
snurfen11 years ago

many thanks fella, not seen that tip before. Will spread the word. ;o)

Reply

works in windows 7! (had to press ‘d & enter’ a few times) Thank You!

Reply
Ante11 years ago

thanks
works where advisor from belarc, gpu-z etc doesn’t

Reply

very good tip.thanks.

Reply
tom jones12 years ago

found this tip helpful among countless of forum-entries, which could not help me !

thanks !!

Reply

great information, I was trying to run DirectX and looking to see if I had hardware acceleration, but couldn’t even determine the video card/adapter! looked in registry (regedit.exe), HKLM video/Device0 etc, then MSINFO.EXE, then DxDiag etc, even download some supposedly sophisticated tools/utilities to identify “any” card – FAILED, but this didn’t —-thanks a bunch!

Reply
Mark12 years ago

Thank you so much! I was finally able to identify this card i have!

Wmic Get Serial NumberReply

you are awesome! i am really computer-handicap. Your instructions and tips were very easy to follow. I was able to obtain my video card driver. Thank you !

Reply
Frank13 years ago

This is extremely helpful!!! Thanks so much!

Reply

A great way to identify the graphics card without opening up the computer.

Reply
Sand of a Beach14 years ago

Thanks man!
This will really help

Reply

thanks

Reply
hunter70714 years ago

good, thanks

Reply

Very nice, I like it.

Reply
CypherHackz14 years ago

Wmic Get Serial Number Command

nice tips! :)

Wmic Get Serial Number Remote Computer

Reply

Wmic Get Serial Number Bios

Leave a Reply