Acronis True Image Sandisk

Beginner
Acronis True Image Sandisk
Comments: 4

I can't get Acronis Media Builder to create bootable rescue media on a Sandisk Extreme USB 3.0 64GB drive, using Windows 7. It doesn't show the drive is the list of available ones.

Acronis true image sandisk download

I've formatted the drive as FAT32, using various utilities that allow that for more than 32GB, and I also have a 64GB Corsair USB 3.0 drive which is recognized by ATIH as being suitable as bootable media.

Any ideas what ATIH may not like about the Sandisk drive?

Acronis True Image HD 2015 Click the language you want to install to start downloading the Acronis Software. Once downloaded install the software and follow the instructions in the software and/or the setup guide provided with your product. Home Acronis True Image Discussions Acronis True Image Home Forum - Older Versions Can't create bootable media on Sandisk Extreme USB 3.0 64GB Welcome to Acronis Community! Log in to follow, share, and participate in this community.

With Acronis True Image, you have the benefit of disk backup and disk cloning tools, including flexible scheduling options, incremental imaging backup, the ability to choose what files and programs are backed up, and a host of choices as to where to store your. Windows 7、8、10でAcronis True Imageを使用してSSDにクローンを作成するにはどうすればよいですか?Acronis True Image 2019を使用して、HDDをSSDにクローンするための詳細な手順を取得します。. With Acronis True Image, you have the benefit of disk backup and disk cloning tools, includingflexible scheduling options, incremental imaging backup, the ability to choose what files and programs are backed up, and a host of choices as to where to store your cloned-disk image. All that and simple to use too.

Legend
Comments: 11125

Acronis True Image 2017 Wd Edition

Sandisk has the extra partitions which may ge involved.

You could try this tool and see if it helps. Be sure to wipe the Sandsik clean so only 1 partition.

updated Nov 1, 2014
This link by user Joey also provides more picture illustrations of the differences.

Acronis Sandisk Ssd

Beginner
Comments: 4

Thanks. I tried that utility but it says the disk is write protected, which no other utility had mentioned before. After that, the disk was left in an uninitialized state, so I had to re-initialize and create a volume with Windows. Then I did a full format with the HP utility, but ATIH would still not show the drive. I also tried CLEAN ALL with DISKPART.

I Googled and found a thread which suggested the Group Edit Policy may be the problem, so (since I only have Windows Home Premium (x64)) I had to download and install gpedit.msc. I ran this, and there is supposed to be an entry under: System Configuration (and User Configuration) > Administrative Templates > System > Removable Storage Access, however I don't have either entry showing.

Acronis True Image Sandisk

So, I still can't get ATIH to list the drive in the Media Builder. However, in the meantime, I found a simple workaround, i.e. use Media Builder to write to another USB drive which it can find, then just copy all the files to the Sandisk drive.

Having done that, I can now boot into ATIH from the Sandisk drive, which is what I wanted to achieve.

I would still like to know what ATIH Media Builder is actually looking for, when it won't recognize the Sandisk, but that can go on the back burner for now.

Legend
Comments: 11125

At least you have a workaround. I have no answer to your question regarding why Sanddisk cannot be used by Acronis to create a bootable stick. I avoid Sandisk because of its uniqueness and not a standard usb stick.

Grovers status = Inactive1. Grover's New Revised Guides4. 2014 Cleanup 2015 Cleanup 5. Attachments/How7.TI 2015 FAQ.
2. Create BKU Tasks >2011_2012_20132A. Using 20146. Help 20162015201420138. Stop Scan for Backups8A. ATIH Video's
3. Create new disks-Guides.9. Register/Downloads10. Mustang's New Guides11. Les Seiler's Backup Video

Beginner
Comments: 4

I think I just realized what the problem is with the Sandisk. I hadn't noticed that it was showing up as a Fixed Disk, instead of a Removable Disk. Googling shows this to be an issue with many Sandisks (something to do with Windows 8 compatibility), and apparently there's no way to change it. This is almost certainly why ATIH doesn't list it.

Perhaps one of these days, I'll upgrade to Windows 8 and the issue will go away.

Damn annoying of Sandisk not to give us a way of changing it, as some manufacturers apparently do.

Forum Member
Comments: 31
ImageAcronis

Actually, getting a usb pen to show as a fixed disk can be quite useful.
If it shows as a removable disk, windows only allows one primary partition.
Matrix jitsi meet. If it shows as a fixed disk, windows allows multiple primary partition.

Windows 8 (PRO) will actually allow you to create a USB with windows fully installed on it i.e. you can go to a PC and load your version of OS from USB pen instead of PC OS. You can only do this on USB pens that allow multiple partitions (i.e. fool PC into thinking USB is a hard disk).

I know this works for EFI systems, not sure about older bios.

Beginner
Comments: 11

I solved the problem quite easily: using Easeus I was able to restore the drive to FAT32 with no problem.

I connect my SanDisk 240GB SSD to HP laptop, Windows 10, with a Sabrent SSD to USB 3.0 adapter cable, try installing the WD Acronis software and it’s BLOCKED! “Acronis True Image WD edition Installation Restricted”

For some reason, Acronis software install check appears unable to detect my SanDisk SSD Plus drive. Windows reports the device as a ‘Sabrent SCSI disk device’.

The HDD in my HP Laptop is an HGST 1TB drive. HGST is also owned by Western Digitail, yet neither the HDD nor the SSD is recognized by the Acronis install check as being qualified Acronis WD version supported. Very BAD.

Is there a workaround for this, or am I going to have to use another cloning software which won’t erroneously fail a check for supported drive (SanDisk/WD)?

Thanks,

~wheatshocker